Does OBDSTAR X300 DP Plus do Renault trafic 2017 keyless card all keys lost situation?
 
Impossible all keys lost. Obdstar works on Megane 4, Talisman, Scenic 4 etc all keys lost, but not for Renault traffic unless you use another ma...

 Here is a quick guide showing how to retrieve the SKC/PIN from the clusters immobilizer data on a VW Golf mk4 and then using that SKC to immo match some keys with the cheap $50 Xtool VAG401 scan tool. Using this method does not require ...

 Here comes the unbiased review of the new CG FC200 ecu programmer. What it did and failed.
"I am going to go through different features of the new CG FC200 I purchased recently. It doesn"t have a lot of features but it"s got a few usef...

 Are you tired of typing Renault‘s unlocking gateway password every time?
Are you tired of endless waiting time of hot line to unlock Renault Gateway?
Are you tired of searching for the small Renault-Token that you just dropped s...

 As titled, looking for a programmer to do Toyota CHR 2020 Proximity All Keys Lost, what till do, Will XHORSE with Toyota 8A AKL Adapter can do it ? can it be done via OBD?
 
8A AKL harness is for blade key, not proximity.

 We had a customer who failed to read this Ecu BMW MSV80 with Hextag in 3 modes. He was trying to retrieve ISN for all keys lost job.
 

  FORScan team recommends the Vgate vLinker FS USB interface for its full FORScan"s advanced functions, Ford agreements and modules.  Compared with the other Forscan supported interfaces, the Vlinker FS USB interface is fast, with rock s...

 Purpose of downgrade: xprog clone v5.5.5 cannot read or write BMW FRM3 reliably.
Solution: Downgrade to X-Prog v5.5.1 and use a dump from the Internet (v5.5.1 can"t read D-flash) or buy a new Xprog v5.6 or newer (latest v5.84).
 

  Q: Looking to do BMW FRM3 programming and looking at purchasing the Xhorse VVDI Prog. I am curious if I were to get a corrupted FRM3 read is there a cloud database Xhorse has that will have a good eeprom file to flash back into the cor...

 Launch X431 V 8 inch diagnostic tablet Keeps Stopping (that means I can’t open the app), and now I erase everything. please I need download the app again.
 
 

  The new KTM200 bench boot programmer adds 200 more Bosch ECUs comparing KTM V1.20.
 
 

  Yanhua Mini ACDP will release a new function (being tested): program key for Jaguar / LandRover 2018 onwards via OBD including adding a new key and program key when all keys lost.
 
Please be informed: