We programmed a new remote key to a 2008 Smart Fortwo 451 with Autel MaxiIM IM608/IM508because it lost all the keys. Car has the anti-theft indicator on.
 
 

  Question:
2020 Toyota Highlander all keys lost.
Tango fail

  Launch X431 PAD V Mercedes Benz E300h W212 Xenon headlamp calibration DTC C156E00 Calibration of vehicle level was not performed.
 

  Question:
I have a few Opel/vauxhall keys that I want to renew. with Delphi, valeo and Siemens types. probably astra h,Corsa d and zafira b.
Delphi:

  Lonsdor K518ISE /K518S JLR update! 2015-2018 Land Rover & Jaguar All key lost& Add key by OBD
Free dismantle
Support AKL programming even under alarm state

  The influence of Audi OE strategy changes has led to the suspension of online calculation functions at home and abroad – Announcement from Autel (based on MaxiIM IM608/IM508).
 
What VAG car models are influenced?

 CG AT-200 is able to read BMW ECU Mevd17.2 on Bench in 3 minutes. Please read this article for the procedure.
 
F22 with N20 engine, took 2 minutes to remove from the car.

 If you are looking for a bench tool mainly for Bosch EDC16/MEDC17 in service mode for the mainly jobs including ECU cloning, mileage correction and some DPF/EGR/DTC off..  Then you have come to the right place.
 
FYI, Bench mode is a ...

  Problem:
I try to make Toyota 8A smart key AKL with Lonsdor K518ISE and LKE emulator, the device said it has bound to k518. but it failed me and LKE is not generating key from eeprom file.
See error images below:

  OBDSTAR CANFD Adapter is designed for diagnosing ECU systems of cars meeting with  CAN FD protocols. It"s used with OBDSTAR"s tablets series products such as X300 DP Plus, Key Master  DP Plus.
 
Compatible with: X300 DP Plus /Key Mas...

  Problem:
I tried to do GMC Acadia 2008 online programming via SPS (Service Programming System) with Autel MaxiIM IM608. But IM608 showing this dialog:
Service Programming System

  Have BMW CAS3 immo eeprom flash to read, Xhorse VVDI Prog is the best, Yanhua Digimaster 3 (D3)  is okay too, but need more skills.
 
Part 1. Use Yanhua Digimaster 3 to read BMW CAS3 eeprom / flash