кола за диагностика
Постинги в блога от Август, 2022 г.
31.08.2022 09:09 -
Autel IM508 VW Golf 2009- VDO 24C64 AKL in Service Mode
Most VW, Audi, Skoda, Seat cars after 2009 with VDO NEC clusters all keys lost can be done with Autel IM508/IM608/IM608 Pro via dump using APA102 clip adapter no soldering. It is like 10 minutes job. Really quick.
Read immo data, en...
Read immo data, en...
29.08.2022 09:59 -
Fetrotech Tool Wiring Diagram Free Download
Are there any wiring diagrams in Fetrotech Tool bench tool? Yes, pcmtuner team does make fetrotech pinouts.
Check Fetrotech Tool Wiring Diagram Pinout
Check Fetrotech Tool Wiring Diagram Pinout
25.08.2022 10:00 -
Read and Write Simos PCR 2.1 with ECU Bench Tool on bench
ECUHelp ECU Bench Tool reads and writes Simos PCR2.1 on bench perfectly. You need nothing to unlock. Unlock is only for the Digital Signature.
ecu bench tool Simos PCR2.1 pinout
ecu bench tool Simos PCR2.1 pinout
24.08.2022 10:04 -
Mini VCI Techstream Review on Lexus SC430 2007
Which cable and techstream version for Lexus SC430? Check the user test report and review below.
My mini vci v1.4.1 cable off obdii365.com works with the following
My mini vci v1.4.1 cable off obdii365.com works with the following
23.08.2022 09:19 -
KT200 ECU Programmer Unbiased Review
What would you say this KTM200/KT200 ecu programmer over any other ecu tools? Here the success and failure report from KT200 users.
22.08.2022 10:48 -
How to Change Xentry XDOS to Xentry Passthru?
Is it possible to switch between Xentry XDOS and Xentry Passthru? Can I change my Xentry XDOS configured for MB SD Connect C4 to use with Autel J2534 Passthru?
Here’s the clue.
Here’s the clue.
18.08.2022 10:10 -
KT200 Read and Write VAG MG1CS001 SPC 5777 Successfully
MG1 MD1 ECUs are verified working with KT200/KTM200/ECUTuner ecu programmer. Obdii365.com engineers have tested VAG MG1CS001 SPC 5777 reading and writing without problem, fast in 5 minutes.
16.08.2022 12:48 -
Autel Smart Key Hardware Not Match Error Solution
Here comes the working solution to Autel IM608 generate universal key hardware version type does not match the program problem.
The problem goes like this:
The problem goes like this:
15.08.2022 10:36 -
Download & Install KTM200 ECU Programmer Software
Tutorial: Download, install driver and software for KT200/KTM200/ECUTuner ecu programmer, check wiring diagram, ECU and TCU.
Part 1: Download & Installation
Part 1: Download & Installation
11.08.2022 11:38 -
Free Download VR Files and Damos Pack 2021
We share our collection of free VR files and WinOLS 4.51 VM Damos Pack for ecu chip tuning tools.
Free Download VR Files
Free Download VR Files
10.08.2022 09:19 -
PCMTuner Flash 1.2.7 Activation Failed Solution
Here is the working solution for people who has problem activating pcmtuner flash 1.2.7 software.
First of all, follow instructions here to send the device ID to info@tuner-box.com and activate pcmtuner with license key.
First of all, follow instructions here to send the device ID to info@tuner-box.com and activate pcmtuner with license key.
09.08.2022 11:52 -
Autel IM608 program Benz W207 All Keys Lost No Remove EIS
We are doing all keys lost on Mercedes c300 2011 (W207) with the Autel MaxiIM IM608 through the Obd no need to remove the EIS. Only fobik AKL can be done via OBD in car. Not only W207, you can do other Mercedes new fobik via OBD, i,e ...
Търсене
За този блог
Гласове: 20
Блогрол