кола за диагностика
Постинги в блога от Септември, 2022 г.
29.09.2022 09:25 -
How to Clone Fiat Marelli MJ8DF ECU with KT200?
KT200/KTM200 has been confirmed no problem reading and writing Fiat Marelli MJ8DF ECUs.
KT200 MARELLI MJD 8F, 8S, 8DS – FIAT, Suzuki [Diesel] pinout
KT200 MARELLI MJD 8F, 8S, 8DS – FIAT, Suzuki [Diesel] pinout
28.09.2022 09:51 -
KT200 Read and Write PSA EDC17C60 No Tprot Off
Question: To do Adblue OFF on Ecd17C60 (PSA) KT200 correct Tprot automatically or do you have to do it manually like pcmtuner?
Answer:
Answer:
27.09.2022 09:49 -
KT200 VAG Simos PCR2.1 Unlock By OBD
Will KT200/KTM200 program VAG Siemens Simos PCR2.1 via OBD without opening ECU and unlocking EEPROM?
Yes, it’s OBD VR read. Get Identify, and get an Ori, modify Ori and during write tool applies Patch.
Yes, it’s OBD VR read. Get Identify, and get an Ori, modify Ori and during write tool applies Patch.
26.09.2022 11:40 -
Tips to Read Sprinter 02-05 Immo Box with Autel XP400 Pro
Problem:
I have chip “answer error” on immobox temic sprinter 2002 with autel im608 pro, it is not the same photo in autel and vvdi prog, that of vvdi prog corresponds well to reality.
Which pins correspond to Pta0, ptc0 ...
I have chip “answer error” on immobox temic sprinter 2002 with autel im608 pro, it is not the same photo in autel and vvdi prog, that of vvdi prog corresponds well to reality.
Which pins correspond to Pta0, ptc0 ...
22.09.2022 11:58 -
Possible to Have a SGW subscription on Autel IM608?
Question: How can I use FCA SGW on Autel MaxiIM IM608, IM608 Pro or IM508? Is it possible to have a SGW subscription? I have 12+8 cable but I don’t want to spend time searching for sgw location. I want to use fca authentication b...
21.09.2022 10:56 -
Yanhua ACDP Module 28 Clone JLR ZF-9HP Gearbox in Boot
Yanhua Mini ACDP tech released new module 28 to clone ZF-9HP gearbox in boot mode. Supports Jaguar, Land rover, Chrysler, Dodge, Fiat, Honda, Jeep and other models of the ZF-9HP gearbox boot mode cloning.
20.09.2022 10:16 -
KT200 Read and Write PSA DCM6.2A Flash by OBD
There are not many tools to make PSA group DCM6.2A ECU via OBD. KT200/KTM200/ECUTuner ecu programmer is confirmed working via OBD.
Reading writing flash by OBD DCM 6.2A PSA SUCCESS:
Reading writing flash by OBD DCM 6.2A PSA SUCCESS:
19.09.2022 10:43 -
Fetrotech Tool Win10 Installation without Problems
Many people are struggling to install Fetrotech Tool software on Windows 10 Pro operating system. Some of them has software crash or task bar disappear problem. Here is the customer solution and tested working great.
15.09.2022 10:33 -
JLR 2015-2018 All Keys Lost Programming with OBDSTAR via OBD
Now Obdstar has 2015-2018 Jaguar Lange Rover all key lost by OBD function since immo software version V31.31. This upgrade can be applied to x300 dp plus and x300 pro4.
14.09.2022 11:33 -
Fetrotech Tool Read Peugeot EDC16C34 on bench
You cannot find the PSA edc16c34 calculator in pcmtuner because it is done by fetrotech plugin. edc16c34 psa has been tested with fetrotech tool.
User review:
User review:
13.09.2022 12:44 -
How to Repair BMW FRM with Autel IM608 without Converting EEPROM
Previously when I used Autel to repair BMW FRM, it would not read corrupted D-flash. The only way I could repair FRM was to search online for matching EEPROM and P-FLASH files and write them to FRM. With recent updates the Autel will no...
09.09.2022 11:40 -
KT200 Virtual Reading Review
KT200/KTM200/ECUTuner Virtual reading is working?
Yes and No.
Yes and No.
Търсене
За този блог
Гласове: 20
Блогрол