Confirmed: Launch X431 PAD VII can perform Online SCN Coding till year 2021 including VW, Audi, Mercedes Benz, BMW etc. This software is constantly being updated, and it is recommended that you provide the specific car model and VIN nu...

 Autel MaxiIM IM508/IM608/IM608 Pro can read BMW ISN from DME in 3 modes: via OBD, on bench and boot mode.  Obdii365.com here provides a supported ISN list of MaxiIM tools.
 
OBD mode:

 Here is the working solution to MB star diagnostic system SDConnect C4 Xentry online update Connection failed problem.
 
Problem:

  Today we have Xtool X100 PAD3 SE with KC501 programmer, and then of course we have the AUTEL IM608 PRO with XP400 Pro, we have all hooked up, I want to explain to you guys at differences, similarities.
 
 

  Easydiag + 24V to 12V adapter = HD Module for trucks? The easydiag 12V to 24V HD adapter has been a while since it was released, it is advertised it would do HD modules’ job.  There are two most frequently asked questions:
1.) I...

  Here comes the common problem with BMW CAS3 key programming via OBD:
BMW X1 2011 CAS3++ istap now cannot turn on with the working key. I downgraded CAS3, did put battery support on (GYS Flash) but Wifi cut out during update. And it fa...

 My dad has a 2012 Chevy Equinox that uses newer GM network platform. No diagnostic coverage using a GM Tech2. The Equinox has been suffering some BCM problems lately with no way to plug in.. Only thing I could get was powertrain codes u...

 Main benefits of an ICOM from our perspective:
1. Wireless diagnosis connection
2. Ease of use in a shop with multiple active connections

  Autel engineers are on track for a VW software update V5.10 in Autel IM508/IM608/IM608 Pro on 10/8/21.  VW version V5.10 has been released so IMMO IV, IMMO IMMO IV+MQB and IMMO MQB types, all keys lost or add key that can only be done ...

  TOYOTA Techstream V16.20.023 (08/2021) is newly tested working like a charm.
Techstream is the replacement for diagnostic tester. It combines the functionality of TIS and scantool in a single portable device. With TIS techstream, tech...

  With Launch X-PROG3 Immo and Key Programmer, you can renew Mercedes Benz engines ECUs: MED17.7. X, ME9.7, SIM271KE2.0, SIM271DE2.0 etc by Launch X431 tablets (X431 V+, PAD V, PAD VII). You can also reset and reuse a used BMW DME. The B...

  Xtool tablets released new upgrade adding 2015-2018 Jaguar/Land Rover all smart keys lost/add key via OBD bypass PIN code in July 2021. Here is a demo guide on adding a spare smart key with xtool x100 pad2. All keys lost is similar to ...